Advertisement
BATTERY COVER LATCH
INSTALLING
DRIVE
BATTERIES
Open the DRIVE BATTERY COMPARTMENT by depressing the
BATTERY COVER
LATCH
on the back of the camera.
Install
four size "AA" penlight batteries according to the positive-
negative diagrams
inside the compartment
(see illustration)
and close the cover. These batteries supply power to run the
camera's
motor. Press the TRIGGER
RELEASE
briefly to see
that power
is supplied
properly. If the motor does not run,
check battery installation for correct position and contact.
Your Argus dealer can supply you with several types of bat-
teries. Some are high-energy types which provide much longer
life. Any of the following kinds are suitable and will provide
approximately the life shown, depending on their age, tempera-
ture conditions and other variables which effect battery life.
STANDARD
CARBON
ZINC ......... up to 5 cartridges
HEAVY DUTY CARBON
ZINC ....... up to 8 cartridges
MANGANESE-ALKALINE
.......... up to 25 cartridges
Ne ALB 2 Bare
aetna hare rem eerie toa up to 36 cartridges
Advertisement
