Advertisement
USING THE FLASH UNIT.
If you haven't an
Argus Flash Unit, you 're missing lots of fun. You
can get one inexpensively from your dealer-
ask for the Argus Flash
127.
(Fig.
5)
INSERT BATTERIES.
Loosen screw on back
of flash unit with coin. Remove back cover. In·
stall two new AA photoflash penlite batteries,
one tip up, one tip down, as shown in illustra-
tion at right. Replace cover.
INSTALLING THE FLASHBULB.
Fit the flash
unit back on camera. Hold camera and flash
unit firmly and push flashbulb into the socket.
REMEMBER! Don't put bulb in flash unit before
it is attached to camera.
Advertisement
