Table of Contents
Advertisement
FM MODE/EP
Be sure you've completed the steps of "Memory presetting" on
page 9.
This example in the figure shows how to listen to FM preset channel
3;
Press FM.
The power will be automatically on.
Press
TUNING
MODE
to
select "PRESET",
Each
time you
press
the button,
"MANUAL" and "PRESET" will appear
alternately.
Press V or A to select the
preset channel.
"STEREO" lights when an FM stereo
broadcast is being received. "QUARTZ
LOCK" lights when you precisely tune
in a broadcast station.
'the
ie
Preset Channel
QUARTZ LOCK
STEREO
STEREO
'QUARTZ 00K
Press VOLUME to adjust the
volume as you like.
fH:
Teneo
GuaRT2 09%
13
Press FM or AM.
2. Press TUNING MODE to select "MANUAL"
BO
appear alternately.
. Press V or A to tune in the desired broadcast.
. Press VOLUME to adjust the volume as you like.
FM MODE/BP
When "MONO" indicator goes off:
Use this setting for normal listening. Both stereo and monaural
sounds can be heard as they are.
When "MONO" indicator lights up:
Use this setting when listening to or our recording in monaural.
Ali sound reception including stereo sound, is in monaural.
For your reference:
{f too much noise is produced in the FM stereo mode, press
FM MODE/BP and check "MONO?" lights up.
The sound will then be heard in monaural. If the broadcast
signal is weak, or if there is a large amount of interference,
you will get a clearer sound in "MONO" mode.
You cannot memorize the stations in "MONO" mode.
Advertisement
Table of Contents
