Air Cleaner - Toro Z Master Z-320 OUT FRONT Z Operator's Manual

Traction unit
Table of Contents

Advertisement

POTENTIAL HAZARD
If you leave the key in the ignition switch, someone could start the engine.
WHAT CAN HAPPEN
Accidental starting of the engine could seriously injure you or other bystanders.
HOW TO AVOID THE HAZARD
Remove the key from the ignition switch and pull the wire(s) off the spark plug(s)
before you do any maintenance. Also push the wire(s) aside so it does not
accidentally contact the spark plug(s).

Air Cleaner

Foam Element: Clean and re-oil after every 25
operating hours.
Paper Element: Replace after every 100 operating
hours.
Note:
Service the air cleaner more frequently
(every few hours) if operating
conditions are extremely dusty or
sandy.
Removing the Foam and Paper Elements
1.
Disengage the power take off (PTO), set the
parking brake, and turn the ignition key to
"OFF" to stop the engine. Remove the key.
2.
Clean around the air cleaner to prevent dirt from
getting into the engine and causing damage.
Unscrew the knob and remove the air cleaner
cover (Fig. 13).
1
3
5
7
Figure 13
1. Knob
2. Air cleaner cover
3. Cover nut
4. Cover
Maintenance
2
4
6
8
m–3214
5. Foam element
6. Paper element
7. Rubber seal
8. Air cleaner base
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

74180

Table of Contents