Table of Contents
Advertisement
TIMER/BLOCK
Internal clock
Once the internal clock is set, the current time will appear on
the screen. It is necessary to set the clock correctly to
activate the program start TIMER and channel BLOCK.
Program start TIMER
Makes a program of your choice appear on the screen
automatically.
Channel BLOCK
Blocks a channel from appearing on the screen for 12 hours.
Use channel BLOCK to prevent children from watching
undesirable programs.
The buttons used for setting the internal clock, program start
TIMER and channel BLOCK are located on the Remote
Commander.
TIMER OFF/REPEAT button ——--—~
Used to deactivate or
reactivate the program
start TIMER.
CLEAR button
ne
TIMER/BLOCK button
Used to change the "pages".
See next page.
This button and the TIMER/
BLOCK button on the TV are
operated in the same way.
AM/PM button
Used to erase the time and
channel number from the
set'Ss memory.
Notes
* All settings will be erased from the set's memory if the
set is unplugged, or if a power failure occurs.
¢ The TIMER and BLOCK will operate only if the clock is
set correctly.
¢ If the TIMER and BLOCK are set for overlapping times on
the same channel, the blocked channel will appear on
the screen at the time set on the TIMER.
10
Each time this button is
pressed, the on-screen
"AM" and "PM" indications
will appear alternately.
Remote Commander
Advertisement
Table of Contents
