Table 31 Comparison Of Eap Authentication Types - ZyXEL Communications G-220 V2 User Manual

ZyXEL G-220 v2 User's Guide
PEAP (Protected EAP)
Like EAP-TTLS, server-side certificate authentication is used to establish a secure connection,
then use simple username and password methods through the secured connection to
authenticate the clients, thus hiding client identity. However, PEAP only supports EAP
methods, such as EAP-MD5, EAP-MSCHAPv2 and EAP-GTC (EAP-Generic Token Card),
for client authentication. EAP-GTC is implemented only by Cisco.
LEAP
LEAP (Lightweight Extensible Authentication Protocol) is a Cisco implementation of IEEE
802.1x.
Dynamic WEP Key Exchange
The AP maps a unique key that is generated with the RADIUS server. This key expires when
the wireless connection times out, disconnects or reauthentication times out. A new WEP key
is generated each time reauthentication is performed.
If this feature is enabled, it is not necessary to configure a default encryption key in the
Wireless screen. You may still configure and store keys here, but they will not be used while
Dynamic WEP is enabled.
Note: EAP-MD5 cannot be used with Dynamic WEP Key Exchange
For added security, certificate-based authentications (EAP-TLS, EAP-TTLS and PEAP) use
dynamic keys for data encryption. They are often deployed in corporate environments, but for
public deployment, a simple user name and password pair is more practical. The following
table is a comparison of the features of authentication types.

Table 31 Comparison of EAP Authentication Types

Mutual Authentication
Certificate – Client
Certificate – Server
Dynamic Key Exchange
Credential Integrity
Deployment Difficulty
Client Identity Protection
90
EAP-MD5 EAP-TLS
No Yes
No Yes
No Yes
No Yes
None Strong
Easy Hard
No No
EAP-TTLS PEAP
Yes Yes
Optional Optional
Yes Yes
Yes Yes
Strong Strong
Moderate Moderate
Yes Yes
Appendix E Types of EAP Authentication
LEAP
Yes
No
No
Yes
Moderate
Moderate
No