Table of Contents
Advertisement
9.2 Operating the manual override (only relevant for type
.WE6.6X/.NXE...)
Danger of damage to property!
An uncontrolled operation of the manual override bears the danger of damaging the
system!
▶
Only operate the manual override if it is ensured that this will not trigger any
dangerous working movement of the connected actuator.
▶
Only operate the manual override when the pressure in the tank channel does
not exceed 50 bar. Above this pressure value, the actuating force to be applied is
too large.
▶
Do not use sharp-edged tools to operate the manual override.
Valve type .WE6.6X/.NXE... is equipped with a manual override. Using this manual
override, the switching function of the valve can also be triggered if the solenoid coil
is not energized.
The manual override is only intended for manual operation. It is not suitable for
frequently recurring manual operations.
The manual override is located on the side of the valve solenoid facing away from the
valve.
NOTICE
RE23178-XE-B/10.20, WE6..6X/...XE..., Bosch Rexroth AG
Operation
37/52
Advertisement
Table of Contents
