Table of Contents
Advertisement
CD Edit recording
Use this function to fade out the end of a cassette when recor-
ding from a CD.
Time edit
Use this function to edit the selections on a CD into 2 pro-
grammes that will fit within the recording length of each side of
the cassette tape that you are recording on.
Cross fade edit
Similar to the time edit function, with the addition of automatic
fade out/fade in between tracks to make transition smooth.
Follow steps 1 and 2 of "Fade edit recording'.
Press the remote control's EDIT button until the EDIT
TIME
indicator
(for time
edit recording)
or EDIT
CROSS
indicator
(for cross
fade
edit
recording)
flashes on the system FL display.
Press the remote contro!'s PROG button.
The TOTAL REMAIN indicator wil! appear and the C-4 indi-
cator will flash.
Set the recording length of the cassette tape being
4 used:
Note:
When using a C-60 cassette tape for example:
@ 4 second blank spaces are automatically inserted between
Press the remote control's TUNER/CD 10KEY +10 button
tracks during fade or time edit recording.
until "C-6" appears on the FL display, then press the 0 but-
ton.
"C-60" will appear and the CD player will then edit the CD's
Fade edit recording
selections into A and B programmes.
5 Press the > / Ii button to start edit recording.
The cassette tape will be rewound to the beginning and
| Load the compact disc you want to record from into
the CD player.
recording and CD playback will be started automatically.
Make sure that the system is set to the CD function.
When recording on one side of the cassette tape has fin-
if the CD's disc data has not been read, play it back for a few
ished the cassette tape will be reversed and recording will
seconds and then stop playback before proceeding.
then continue on the reverse side.
2 Load a blank cassette tape into the TAPE II deck.
To stop recording and playback
@ Press the CD player's @ button.
Press the remote controls EDIT button until the EDIT
:
:
will stop but CD playback will continue.
EDIT
—»> EDIT
—>
EDIT
-—>
OFF
| FADE
TIME
CROSS
(No indication |
;
To
confirm
the
A
and
B
pro-
Press the remote control's PROG button.
grammes
EDIT FADE will stop flashing and the TOTAL REMAIN indi-
The track numbers and total recording time of the A and B
cator will light.
programmes can be displayed on the system FL display for
Note:
@ When recording is started from the A programme, both the A
and B programmes will be recorded. When started from the
B programme, only that programme will be recorded.
To stop recording and playback:
Press the CD player's Mf button.
To cancel fade edit recording
lM Press the remote control's CLEAR button.
If the tape counter is displayed, first press the remote con-
trol's DISPLAY button to cancel the tape counter display.
if the CLEAR button is pressed during recording, recording
will stop but CD playback will continue.
Advertisement
Table of Contents
