ZyXEL Communications P-792H Compact Manual page 24

LABEL
No.
Source IP
Destination IP
Service
Action
Log
Rules Reorder
To Rule Number
Move
Follow these directions to create a new rule.
Step 1. In the Summary screen, click a rule's index number. The Edit Rule screen opens.
Step 2. Configure the Source Address and Destination Address for the rule.
Step 3. In the Available Services text box, select the services you want. Customize ports for
services not predefined by the Prestige by clicking the Edit Available Service buttons.
For a comprehensive list of port numbers and services, visit the IANA (Internet Assigned
Number Authority) web site.
Prestige 792H
Table 4 Firewall Rules Summary: First Screen
This is your firewall rule number. The ordering of your rules is important as
rules are applied in turn. The Move field below allows you to reorder your
rules. Click a rule's number to edit the rule.
This is the source address of the packet. Please note that a blank source or
destination address is equivalent to Any.
This is the destination address of the packet. Please note that a blank
source or destination address is equivalent to Any.
This is the service to which the rule applies.
This is the specified action for that rule, whether to Block (discard) or
Forward (allow the passage of) packets.
This field shows you if a log is created for packets that match the rule
(Match), don't match the rule (Not Match), both (Both) or no log is created
(None).
You may reorder your rules using this function. Use the drop-down list box
to select the number of the rule you want to move. The ordering of your
rules is important as rules are applied in turn.
Use the drop-down list box to select to where you want to move the rule.
Click Move to move the rule.
DESCRIPTION
24