3-11 Installing the GPU Card
• Voltages can be present within the server whenever an AC power source is connected.
This voltage is present even when the main power switch is in the off position. Ensure
that the system is powered-down and all power sources have been disconnected from the
server prior to installing a PCI card.
Failure to observe these warnings could result in personal injury or damage to equipment.
• The PCI riser assembly does not include a riser card or any cabling as standard. To install
a PCI card, a riser card must be installed.
Follow these instructions to install the GPU card:
1.
Loosen the four thumb screws securing the PCI cage at the top of the system.
2.
Open the two cable clamp clips to lift up the PCI cage from the system.
3.
Remove the two screws securing on the cage and remove the PCI bracket.
4.
Insert the card into the selected slot. Make sure that the card is properly seated.
5.
Secure the GPU cards in place with two screws.
1
System Hardware Installation
1
3
- 38 -
2