SAFETY & WARRANTY WARNINGS READ THE FOLLOWING "SAFETY INSTRUCTIONS AND WARNINGS" CAREFULLY BEFORE USING THIS PRODUCT to ensure proper operation. If you do not understand this "Safety Instructions and Warnings", please contact the distributor or technician. Otherwise, personal injury or damage to the user may occur.
Use electronic medical devices implanted in the human body, such as pacemakers, etc.; People who are being treated by a doctor, especially those who suffer from chronic pain and illness. Patients with conditions such as cancer, heart disease, and those in emergency care for medical conditions or recovery.
ASSEMBLY INSTRUCTIONS 1. Open the box. 2. Remove the power unit accessory box and topper. Place the accessory box on a flat surface, taking care not to drop it. Lay the topper flat on the bed or on a clean, flat surface 3.
Remote battery installation instructions: The remote control requires 2 AAA batteries, follow the steps as follows: INSTRUCTIONS FOR USE 1. Unfold the Mattress Massage Topper and place on the mattress. Alternatively, the mat can be placed on a clear and flat floor.. 2.
We recommend starting on LOW intensity as you can at first and increase the intensity during the program later as you need. 8. Choose the massage timer for programs: 10mins= 1 green light 20mins = 2 green lights 30mins = 3 green lights We recommend starting on 10mins as you can at first and increase the intensity during the program later as you need.
FOR CLEAN: Unplug the device and allow it to cool before cleaning. Clean only with a soft, slightly damp sponge. Never allow water or any other liquids to come into contact with the unit. DO NOT immerse in any liquid to clean. NEVER use abrasive cleaners, brushes, gasoline, kerosene, glass/furniture polish, or paint thinner to clean.
Page 9
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.