Advertisement
Quick Links
ALL IN ONE FOUNDATION
Patent Pending
Please Note:
The Foundation should be assembled on a hard, flat Surface
Be aware of rough or sharp edges, use care during assembly - It is recommended that two people are available for assembly -Please follow steps in order for best results
Advertisement
Related Manuals for Nature's Sleep GHOSTBED ALL IN ONE FOUNDATION
Summary of Contents for Nature's Sleep GHOSTBED ALL IN ONE FOUNDATION
- Page 1 ALL IN ONE FOUNDATION Patent Pending Please Note: The Foundation should be assembled on a hard, flat Surface Be aware of rough or sharp edges, use care during assembly - It is recommended that two people are available for assembly -Please follow steps in order for best results...
- Page 2 Unfold the side vertical outside supports (A) placing Align the side vertical support corners with Place the Bundled slat sections (D) in them approx. 4 feet apart with the hinges facing inward. the horizonal support corners and attached the middle on each side snapping each Unfold and place the center middle vertical support (B) with 1 screw and nut at the top and 1 at the slat end into the plastic seat.