Mid-roll Film Change
o • In locations exposed to strong radio waves or
electromagnetic fields (near a broadcasting tower, etc.),
a partially used film cartridge may fail to wind on when
loaded. When this occurs, the
0
and the "0" in the
frame counter on the LCD panel both blink as a
warning. Remove the partially used film cartridge.
This problem does not affect the loading of unused film
cartridges.
• Note that if you load a partially used film cartridge into a
camera that does not support the film cartridge mid-roll
change function, the camera does not advance the film
and will assign the fully exposed status to the film
cartridge. It will then no longer be possible to take
pictures in the unexposed frames.
2
H-39