Table of Contents
Advertisement
Making system connections
e
Do not plug in the power cord until all connections have been made.
e
On each pair of input jacks, the lower jack (marked R) corresponds to the right channel, and the upper jack (marked L) to the
left channel.
e
Please refer to the instruction manual of each component when making any connections.
Connect the output leads of the turntable to
the PHONO jacks.
Be sure to connect the ground (earth) lead
wire from the turntable to the ground ter-
minal
(GND).
Turntables
not provided
with GND wires do not need to be con-
nected in this way.
Place the turntable on a firm shelf or deck
free from vibrations (especially those gen-
erated by the speaker system). [f the turnta-
ble is permitted to pick up such unwanted
vibrations, not only will the performance of
the unit drop, but distortion in the low fre-
quencies and howling in the speakers may
also occur.
i)
==
2 © sees
|
Connect a compact disc player to the CD
input jacks.
Connect an FM/AM
tuner to the TUNER
Input jacks.
Advertisement
Table of Contents
