Safety Instructions - IKEA SKALAN Manual

ENGLISH
Never use water to extinguish the cooking fire. Switch off
•
the appliance and cover flames with e.g. a fire blanket or lid.
Do not use the appliance before installing it in the built-in
•
structure.
When you route the mains cable, make sure that the cable
•
doesn't come into direct contact (for example using
insulating sleeving) with parts that can reach temperatures
of more than 50°C above room temperature.
WARNING: Use only hob guards designed by the
•
manufacturer of the cooking appliance or indicated by the
manufacturer of the appliance in the instructions for use as
suitable or hob guards incorporated in the appliance. The
use of inappropriate guards can cause accidents.
This appliance is adjusted to be installed from 2 to 2700
•
meters above sea level.

Safety instructions

Installation
Warning! The appliance must be
installed by the authorised
installer.
Follow the Assembly instructions
supplied with the appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Keep the minimum distance from other
appliances and units.
• Always take care when moving the
appliance as it is heavy. Always use safety
gloves and enclosed footwear.
• Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
• Protect the bottom of the appliance from
steam and moisture.
• Do not install the appliance adjacent to a
door or under a window. This prevents
hot cookware falling from the appliance
when the door or the window is opened.
• Make sure that the space underneath the
hob is sufficient for air circulation.
Electrical Connection
Warning! Risk of fire and electric
shock.
• All electrical connections should be made
by the authorised installer.
• The appliance must be earthed.
• Before carrying out any operation make
sure that the appliance is disconnected
from the power supply.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Make sure the appliance is installed
correctly. Loose and incorrect electricity
mains cable or plug (if applicable) can
make the terminal become too hot.
• Use the correct electricity mains cable.
• Do not let the electricity mains cable
tangle.
26