Safety Instructions - Nissin Air 10s Instruction Manual

SAFETY INSTRUCTIONS

These safety instructions refer to important information on how to use this
product safely and properly. Please read the following instructions before
using the product.
CAUTIONS
This sign refers to conditions which may cause damage or defect.
Do not touch the inside parts from the opening when the unit was dropped or broken.
Place the batteries correctly in position. Placing the batteries in wrong polarity may
cause leakage, exothermic heat or explosion.
Do not leave or store the commander unit in the temperature over 40ºC/ 104ºF, such as
in the automobile.
The commander unit is not water resistance. Keep the unit away from rain, snow and
humidity.
Do not use benzene, thinner or other alcoholic agents to clean the unit.
Do not use this commander unit with cameras which are not recommended in the
compatibility list at official website, otherwise it may damage the camera's circuitry
Remove the batteries when not in use for a longer period of time.
Do not use the Nissin Air 10s to pick up whole camera system when it installed on your
camera. To pick up the whole camera system, you should hold the handle of camera
body or the lens..
（*）Please refer Nissin's compatibility chart shown here:
http://www.nissindigital.com/download.html
(*)
.
3