Machine Specifications; Technical Data; Noise Emission; Dust Emission - Jet JPT-410 Operating Instructions Manual

4. Machine specifications

4.1 Technical data

JPT-260:
Planing
Jointing width max 257 mm
Table length
Height above floor
Fence size 1100 x 150mm
Fence tilt
Depth of cut
Thicknessing
Thicknessing width max 256 mm
Thicknessing height
Thicknessing table length
Min. length of work piece
Feed speed
Depth of cut max. 4,5 mm
Number of knives
Cutter block diameter
No load speed n
o
Cuts per minute
Cutter knife length
Cutter knife width
Cutter knife thickness
Dust port diameter
Overall (LxWxH) 1120x700x1000
Net Weight
Mains 230V ~1/N/PE 50Hz
2.8 kW (3.8CV) S1
Output power
Reference current
Extension cord (H07RN-F)
Installation fuse protection
Mains 400V ~3/PE 50Hz
2.2 kW (3CV) S1
Output power
Reference current
Extension cord (H07RN-F)
Installation fuse protection
JPT-310:
Planing
Jointing width max 307 mm
Table length
Height above floor
Fence size 1100 x 150mm
Fence tilt
Depth of cut
Thicknessing
Thicknessing width max 307 mm
Thicknessing height
Thicknessing table length
Min. length of work piece
Feed speed
Depth of cut max. 4,5 mm
Number of knives
Cutter block diameter
No load speed n
o
Cuts per minute
Cutter knife length
Cutter knife width
Cutter knife thickness
Dust port diameter
Overall (LxWxH)
Net Weight
Mains
1120mm
Output power
850mm
Reference current
Extension cord (H07RN-F)
0 - 45°
Installation fuse protection
max.3 mm
Mains
Output power
Reference current
3 - 225 mm
Extension cord (H07RN-F)
540mm
Installation fuse protection
150mm
5,5 m/min
JPT-410:
3
70 mm
Planing
5500 rpm
Jointing width
16500
Table length
260 mm
Height above floor
15 - 25mm
Fence size
3mm
Fence tilt
Depth of cut
100mm
Thicknessing
Thicknessing width
170 kg
Thicknessing height
Thicknessing table length
Min. length of work piece
Feed speed
10 A
Depth of cut
3x1,5mm²
16A
Number of knives
Cutter block diameter
No load speed n
Cuts per minute
3,5 A
Cutter knife length
4x1,5mm²
Cutter knife width
16A
Cutter knife thickness
Dust port diameter
Overall (LxWxH)
Net Weight
Mains
Output power
1400mm
Reference current
850mm
Extension cord (H07RN-F)
Installation fuse protection
0 - 45°
Mains
max.3 mm
Output power
Reference current
Extension cord (H07RN-F)
3 - 225 mm
Installation fuse protection
540mm

4.2 Noise emission

150mm
7 m/min
Determined according to EN 861
(Inspection tolerance 4 dB)
Work piece pine wood:
3
W=100mm, L=1000mm, moisture 8,5%
70 mm
5500 rpm
Planing:
16500
Acoustic power level
310 mm
15 - 25mm
3mm
100mm
1400x750x1000mm
230 kg
230V ~1/N/PE 50Hz
2,2 kW (3 HP) S1
13 A
3x1,5mm²
16A
400V ~3/PE 50Hz
2,2 kW (3 HP) S1
5 A
4x1,5mm²
16A
max 407 mm
1660mm
850mm
1100 x 150mm
0 - 45°
max.3 mm
max 407 mm
3 - 225 mm
600mm
150mm
7 m/min
max. 4,5 mm
3
70 mm
5500 rpm
o
16500
410 mm
15 - 25mm
3mm
120mm
1660x870x1000mm
315 kg
230V ~1/N/PE 50Hz
2,2 kW (3 HP) S1
13 A
3x1,5mm²
16A
400V ~3/PE 50Hz
3 kW (4 HP) S1
6,5 A
4x1,5mm²
16A
(according to EN ISO 3746):
Idling LwA 89 dB(A)
Operating LwA 101 dB(A)
Acoustic pressure level
(according to EN ISO 11202):
Idling LpA 78 dB(A)
Operating LpA 96 dB(A)
Thicknessing:
Acoustic power level
(according to EN ISO 3746):
Idling LwA 92 dB(A)
Operating LwA 103 dB(A)
Acoustic pressure level
(according to EN 11202):
Operating position 1:
Idling LpA 74 dB(A)
Operating LpA 91 dB(A)
Operating position 2:
Idling LpA 84 dB(A)
Operating LpA 95 dB(A)
The specified values are emission
levels and are not necessarily to be
seen as safe operating levels.
Although there is a correlation between
emission and imission levels, these do
not constitute a basis for determining
the necessity of additional safety
measures.
Workplace conditions which could
influence the noise imission level
include the duration of resonance,
spatial particulars, other noise sources
etc. For example, the number of
machines and other work being
performed. The permissible workplace
levels can vary from country to
country.
This information is intended to allow
the user to make a better estimation of
the hazards and risks involved.

4.3 Dust emission

The planer thicknesser has been dust
emission inspected.
JPT-260, JPT-310:
At an air velocity of 20 m/s on the dust
port dia 100mm:
Vacuum pressure
Volume flow
JPT-410:
At an air velocity of 20 m/s on the dust
port dia 120mm:
Vacuum pressure
Volume flow
The machine meets a workplace dust
emission limit of 2 mg/m³.
900 Pa
565 m³/h
950 Pa
810 m³/h