Use; Control Panel; Controls - Zanussi FE 1004/6 User Manual

Table of Contents

Advertisement

Use

Control panel

1
2
1 ON/OFF button
Press this button to switch the washing machine on.
Press the ON/OFF button again to switch the
machine off.
2 MAINS-ON light
This light is connected to the ON/OFF button. It
lights up when you press the button, and goes out
when you press it again.
3 FABRIC button
Press this button repeatedly to select the programme
on the basis of the type of laundry to be washed. The
light relevant to the selected programme will light up.
The washing machine will propose a temperature.
4 TEMPERATURE button
Press this button repeatedly to increase or decrease
the temperature, if you want your laundry to be washed
at a temperature different from the one proposed by
the washing machine. The relevant light will light up.
Maximum temperatures are 90°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics and
wool/handwash.
By selecting position
cold water. To be used for extremely delicate items,
such as curtains.
90ºC
12 h
60ºC
8 h
40ºC
6 h
/
30ºC
4 h
3
4
5
the machine will wash with
2 h
6
Important!
By depressing TEMPERATURE
START
simultaneously, the acoustic signal is suppressed in
the following cases:
• when depressing the buttons
• when an incorrect option selection is made
• at the end of the programme
5 DELAY START button
This button makes it possible to delay the starting of
the washing programme by 12, 8, 6, 4 and 2 hours.
The delay you have selected is indicated by the
coming on of the corresponding light.
You must select this option after you have set the
programme and before you press the START/
PAUSE button
You can cancel or modify the delay time at any
moment, before you press the START/PAUSE
button. If you have already pressed the
START/PAUSE button, and you wish to cancel the
delay time, proceed as follows:
• set the washing machine to PAUSE by pressing
the START/PAUSE button;
• press the DELAY button once, the light relevant to
the selected delay goes off;
• press the START/PAUSE button again.
Important!
• The selected delay can be changed only after
selecting the washing programme again.
• The door will be locked throughout the delay time
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the
START/PAUSE button. After closing the door, press
the START/PAUSE button again.
8
FE 1004
7
8
9
buttons
.
and DELAY

Advertisement

Table of Contents
loading

Table of Contents