Advertisement
8314 MVL and ReachDSL/MVL Card LEDs
The following table describes the meaning and states of the LEDs on the
Hotwire 8314 card faceplate.
Reach
DSL
8314
00-16866
8312-A2-GZ40-30
Type
LED
LED is . . .
SYSTEM
OK
Green,
Winking
Green, On
Off
Alrm
Yellow, On
Off
Test
Yellow, On
Off
ATM BUS
TX
Green,
Blinking
Off
RX
Green,
Blinking
Off
LOC
Off
Yellow,
On
DSL PORT
1 – 12
Green, On
Off
Green,
Blinking
Green,
Reverse
Winking
December 2000
Indicating . . .
Card functioning normally. Winking describes a
recurring pulse when the LED is ON longer than
OFF at a ratio of approximately 10:1.
Card failure. System processing functions have
stopped.
No power to card.
Alarm is present on card.
No alarms.
Test in progress.
No tests.
Card has placed cells on the backplane bus.
LED blinks on and off 2–4 times per second.
Inactive.
Card has received cells from the backplane bus.
LED blinks on and off 2–4 times per second.
Inactive.
Normal operation.
Card not receiving a clock signal from the
GranDSLAM backplane bus.
DSL link is up.
DSL link is disabled.
Port test is in progress. LED blinks in an on/off
ratio of 1:1.
DSL link is down. Reverse winking describes a
recurring pulse when the LED is OFF longer than
ON at a ratio of approximately 16:1.
5
Advertisement
