Roland Drumatix TR 606 Quick Start Manual page 2

PROCEDURE TABLE
WRITING RHYTHM PATTERNS j
1
1 -
Set the MODE selector (g) to
PATTERN WRITE position.
2
Press the PATTERN GROUP but¬
ton ® to select Pattern Group.
3
Choose the position where you
want to write the first Rhythm j
Pattern by pressing the SELEC¬
TOR switch
4
While holding the SELECTOR
switch ® down.press the CLEAR
/RESET button ©.
5
Press the RUN/STOP button ®.
6
Set up the SCALE selector ®,
then press the FUNCTION button
7
While holding the FUNCTION
button ® down, press the SE¬
LECTOR switch ® of the last
step in the measure.
8
Select the instrument to be writ¬
ten by rotating the TRACK/
INSTRUMENT selector ©.
9
_
Press the SELECTOR switches ®
corresponding to the dots in the
score.
10
Repeat 8—9 for the other instru¬
ments and ACcent.
Select a Rhythm Pattern by press¬
ing a SELECTOR switch
11
Press the RUN/STOP button ®.
fy
Press the TAP button
r—
8
Continue on writing one bar
before the last bar by repeating
the procedures of 6—7.
PLAYING RHYTHM PATTERNS
1
Set the MODE selector (|) to
PATTERN PLAY.
9
Select the rhythm at the last bar.
2
Select a Rhythm Pattern by press¬
ing the PATTERN GROUP but¬
ton ® and the SELECTOR
switch <®.
10
Press the CLEAR/RESET button
©•
l7
Press the TAP button
3
Press the RUN/STOP button 0. \n
Press the RUN/STOP button ®.
1
Set the MODE selector © to
TRACK/WRITE.
www.oldschool-sound.com
2
Choose the TRACK by the
TRACK/INSTRUMENT selector
©■
—
1
Set the MODE selector ® to
TRACK PLAY.
3
Press the CLEAR/RESET button
©■ 2
Select the TRACK by the
TRACK/INSTRUMENT selector
switch ©.
4
Choose the PATTERN GROUP
(1 or II) by pressing the PAT¬
TERN GROUP button ®.
3
Press the CLEAR/RESET button
©•
5
Press the RUN/STOP button ®. |
4
Press the RUN/STOP button ®.
1
Set the MODE selector ® to
TRACK PLAY at the STOP con¬
dition, in case of playing the Rhy¬
thm pattern from the designated
bar. Also, set the MODE selector
® to TRACK WRITE at the
STOP condition, in case of writ¬
ing the Rhythm pattern from the
designated bar.
2
Select the TRACK by the
TRACK/INSTRUMENT selector
©•
3
While holding the FUNCTION
button (3) down, press the SE¬
LECTOR switch ® down to the
designated BAR number.
1
Set the MODE selector ® to
TRACK WRITE.
2
Designate the Bar according to
"DESIGNATING THE BAR
NUMBER."
3
Press the RUN/STOP button ®.
4
Press the PATTERN GROUP
Button ®.
1
Set the MODE selector © to
TRACK WRITE.
2
Designate the Bar according to
"DESIGNATING . THE BAR
NUMBER."
3
Release the FUNCTION button once,
and press it again.
While holding the FUNCTION
button © down, press the DEL
switch.
1
Set the MOOE selector © to
TRACK WRITE.
2
Designate the Bar according to
"DESIGNATING THE BAR
NUMBER."
3
Release the FUNCTION button once,
and press it again.
While holding the FUNCTION
button (J) down, press the INS.
switch.
4
Press the RUN/STOP button ®.
5
Select the Rhythm Pattern by the
SELECTOR SWITCH ®.
6
Press the TAP button (0!.
7
Press the RUN/STOP button ®.