Epson C31C522111 User Manual page 12

English
Installing and Replacing the Ink Cartridge
CAUTION:
Keep the ink cartridges out of the reach of children. Do not drink the ink.
Do not disassemble or refill ink cartridges.
Do not store ink cartridges in high or freezing temperatures.
Do not remove the ink cartridge except when replacing it or preparing the
printer for shipment.
Before using the cartridge, you must remove the yellow tape or printing will
not be possible.
For good printing quality, do not remove the ink cartridge from its clear
plastic packing until immediately before its installation. Use up the cartridge
within six months after unpacking it.
Use up the ink cartridge by the date indicated on the cartridge box or the
ink cartridge itself.
Do not puncture the convex part of the bottom of the ink cartridge or
remove the transparent film on the bottom of the ink cartridge; otherwise
ink may leak.
A used cartridge may have some ink on the convex part of the bottom of
the cartridge. Avoid touching that part to keep your hands clean.
Seiko Epson recommends using genuine EPSON cartridges for your printer.
Products of other manufacturers may cause damages that are not
covered by EPSON's warranties.
When the INK LED flashes, it is almost time to change the ink cartridge.
Change the cartridge as soon as it is convenient. When the INK LED comes
on, printing stops and you must change the cartridge.
The TM-J9100 has two separate cartridges, one each for black and colored
ink (red, green, or blue). Therefore, the TM-J9100 has two INK LEDs, one
for BLACK and one for COLOR.
The TM-J9000 has only one INK LED (for BLACK).
Note:
Ink is used for print head maintenance. For the TM-J9100, both black and colored
inks are used for print head maintenance.
10 TM-J9000/J9100 User's Manual