Table of Contents
Advertisement
4
~OUVRIR
TAL NO.
|
TO PRE AMP OR
INTEGRATED AMPLIFIER
Connection to Preamplifier or Inte-
grated Amplifier
Using the cable provided, connect the
left and right OUTPUT jacks on the back
of the tuner to the Tuner input on your
preamplifier or integrated amplifier. To
avoid sound disturbances and possible
damage to your speakers, be sure to
push the plug all the way into their jacks.
NOTE: Before making this connection,
unplug all the components of your stereo
system from AC power outlets. Also be
careful not to intertwine the connection
wires with any power cord, as this can
degrade sound quality.
REMOTE
IN
UL FILE NO. E28148
AUDIO PRODUCT
O
LISTED 596D
MAX
Oo
TO OTHER REMOTE
CONTROLLED COMPONENT
AC 120V/60Hz
UNSWITCHED
TO
INFRARED
REMOTE
SENSOR
AC Convenience Receptacle
If you wish, your turntable, tape deck,
or other low power stereo component
may be plugged into the back of your
tuner. Power will be supplied to this
other component whether your tuner is
on or off.
NOTE: Do not plug in any component
that requires more than 100 watts of
power. Check the owner's manual of
the component to find its power
requirement.
Advertisement
Table of Contents
