Paradyne COMSPHERE 3830 Quick Reference page 16

S-REGISTERS (continued)
Register Description
S55 Access from Remote
S61 CT111 Rate Control
S62 V.25bis Coding
S63 V.25bis Idle Character
S64 V.25bis New Line Character
S65 Line Current Disconnect
S66 NMS Call Messages
S67 Directory Location 1 Callback
S69 Make Busy Via DTR
S74 Network Position
S75 Network Management Address
S76 V.32bis Dial Autorate
S77 DTR Alarm Reporting
S78 V.32bis Dial Automode
S80 No Data Disc Trigger Signal
S81 Leased Line Signal Quality Retrain
S82 V.32bis Leased Autorate
S84 AT Command Mode
S85 Fast Disconnect
S88 Straps When Disconnected
S89 V.42 ARQ Window Size Increase
S90 DTE Rate = VF Rate
S91 Cellular Enhancements
S93 RJ11 Cellular Adapt
Factory Setting Range
0 0=Enable; 1=Disable
0 0=Disable; 1=Fallback 1; 2=Fallback 2
0 0=ASCII; 1=EBCDIC
0 0=Mark; 1=Flag
0 0=CR+LF; 1=CR; 2=LF
0 0=Enable (>8 msec); 1=Enable (>90 msec);
2=Disable
0 0=Call Connect & Progress; 1=Disable;
2=Call Connect Only; 3=Call Progress Only
0 0=Disable; 1=Enable
0 0=Disable; 1=Enable
0 0=Tributary; 1=Control
255 0–255 (001–256)
0 0=Enable; 1=Disable; 2=Start at 4800 bps;
3=Start at 9600 bps
0 0=Disable; 1=Enable
0 0=Enable; 1=Disable; 2=System85
3 0=RX or TX; 1=TX; 2=RX; 3=TX and RX
0 0(Disable) or 1–5 seconds
0 0=Enable; 1=Disable
0 0=Normal; 1=No Error; 2=No Strap or ERROR
0 0=Disable; 1=Enable
0 0=No Change; 1=Reload; 2=Reload, No Change
0 0(6 frames) – 9(15 frames)
0 0=Disable; 1=Enable
0 0=Disable; 1=Enable
0 0=Disable; 1=Enable
14