Paradyne COMSPHERE 3830 Quick Reference page 15

S-REGISTERS
Register Description
S0 Auto-Answer Ring Number
S2 AT Escape Character
S3 Carriage Return Character
S4 Line Feed Character
S5 Backspace Character
S6 Blind Dial Pause
S7 No Answer Time-out
S8 "," Pause Time for the Dial Modifier
S10 No Carrier Disconnect
S12 Escape Guard Time
S18 Test Time-out
S26 RTS/CTS Delay
S34 1800 Hz Training Tone
S35 Auto Redial (Leased Line)
S36 Rate Auto Originate
S37 Auto Redial (DTR)
S38 DTR Cont Repeat
S39 Receive Buffer Disconnect Delay
S41 Dial Line Rate
S43 V.32bis Train
S44 Leased Line Rate
S45 Leased TX Level
S46 Bad Lines Auto Originate
S47 Auto Dial Standby
S48 Leased-Line Carrier On Level
S49 Transmit Buffer Disconnect Delay
S51 DTE RL (CT140)
S52 DTE LL (CT141)
S53 V.54 Address
S54 V.54 Device Type
Factory Setting Range
1 0(Disable) or 1–255 rings
43(+) 0–127 ASCII
13 0–127 ASCII
10 0–127 ASCII
8 0–127 ASCII
2 2–255 seconds
45 1–255 seconds
2 0–255 seconds
2 0–254 (10ths of a second) or 255(Disable)
50 0–255 in 20-millisecond increments
0(disabled) 0–255 seconds
0 0–255 seconds
0 0(Disable); 1(Enable)
0 0(Disable) or 1(dirs 1–2) – 9(dirs 1–10)
0 0(Disable) or 1(4800) – 6(16,800)
0 0(Dir 1) – 9(Dirs 1–10)
0 0=Disable, 1=Enable
0 0(Disable) or 1–255 seconds
21 1=14400(V.32bis); 2=12000(V.32bis);
3=9600(V.32bis); 4=7200(V.32bis);
5=4800(V.32bis); 6=2400(V.22bis); 7=1200(V.22);
8=1200(212A); 10=0–300(V.21); 11=0–300(103J);
20=19200(V.32terbo); 21=16800(V.32terbo)
0 0=Long; 1=Short
18 1=14400(V.32bis); 2=12000(V.32bis);
3=9600(V.32bis); 4=7200(V.32bis);
5=4800(V.32bis); 6=2400(V22bis);
18=19200(V.32terbo); 19=16800(V.32terbo)
0 0 dBm–15 dBm
0 0=Disable; 1=30 seconds; 2=20 seconds;
3=60 seconds; 4=90 seconds; 21=600 seconds
0 0=Disable; 1=15 minutes; 2=1 hour; 3=4 hours;
255=Test(2min)
0 0=–43 dBm; 1=–26 dBm
10 0=Disable or 1–255 in 1-second increments
0 0=Disable; 1=Enable
0 0=Disable; 1=Enable
0 0(Disable) or 1–34
0 0=Peripheral; 1=Intermediate
13