Cutting The Leading Edge Of Roll Paper Automatically - Canon TM-355 Online Manual

Cutting the Leading Edge of Roll Paper Automatically

If the leading edge of the paper is cut crooked or is not cut straight when roll paper is loaded, it will not print
correctly. If this happens, you can cut the leading edge of the paper straight when loading a paper roll by
using Trim edge first in the operation panel menu.
Follow these steps to change the Trim edge first setting.
1. 1. Select paper settings display area on Home screen.
2. 2. Select Paper settings.
3. 3. Select Advanced.
4. 4. Select Trim edge first.
5. Select a setting from the menu. 5.
This setting takes effect the next time you load a roll.
Auto
If the leading edge of the paper is cut crooked and is not cut straight when loading roll paper, cut the
leading edge straight and eject the fragment of paper to prevent printing on the platen and soiling
the printer.
Off
The edge is not cut and scraps are not removed.
On(Preset Length)
The paper is cut at the pre-defined length when the roll paper is loaded. The pre-defined length
depends on the type of paper. For more information, see "Paper Information List."
Paper Information List
237