3. Disassembly and Reassemble
8
Remove the ASSY PCB MAIN.
1.
Gently lift up (Top Right corner) to release the lock.
2.
Use both hands to hold the board and slide to the
left to release the board.
9
Remove the DC VSS-PD BOARD.
1. You have to discharge the SMPS by using
Discharge JIG across leads of Large Capacitors
as pictured side.
Discharge JIG
•
If LED ON £ LED OFF discharge is
completed.
LED ON
<Before discharging>
9
Then verify voltage is less than 10Vdc across
leads with Volt Meter.
•
43 inches
3-6
Description
Lift up (2EA)
Locking
Mounting slots (4EA)
Fixing Hole
LED OFF
<After discharging>
Picture Description
Slide to the
Left
to release the board
Measurement point