Table of Contents
Advertisement
10 Operating Instructions and Installation
10-2 Connection Panel
1. AUDIO OUT
Connects to the audio input jacks on your Amplifier/
Home theater.
2. DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio component.
3. EX-LINK
Connect this to the jack on the optional
wall mount bracket. This will allow you to adjust the
TV viewing angle using your remote control.
4. PC IN
Connects to the video and audio output jacks on
your PC.
5. HDMI IN 1,2,3 /DVI IN(HDMI1) (AUDIO R/L)
Connects to the HDMI jack of a device with an
HDMIoutput. Use the HDMI 1 IN terminal for a
DVI connection to an external device.
You should use the DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for a video connection,and the
DVI IN 'R-AUDIO-L' terminal for audio.
- No sound connection is needed for an HDMI to
HDMI connection
- When using an HDMI/DVI cable connection, it is
only possible from the HDMI IN 1 terminal.
10-2
6. ANT 1 IN/ANT 2 IN
Connects to an antenna or cable TV system.
7. AV IN 1, AV IN 2
Video and audio inputs for external devices, such as
a camcorder or VCR.
S-VIDEO
Connects an S-Video signal from a camcorder or
VCR.
8.
HEADPHONE
Connects a set of external headphones for private
listening.
9. SERVICE
Connector for service only.
10. POWER INPUT
Connect the supplied power cord.
11.COMPONENT IN 1,2
Connects Component video/audio.
12. KENSINGTON LOCK
The Kensington lock (optional) is a device used to
physically fix the system when used in a public
place. If you want to use a locking device, contact
the dealer where you purchased the TV.
- The place of the Kensington Lock may be different
depending on its model.
[Side Panel Jacks]
Advertisement
Table of Contents
