Leveling Instructions - Hamilton Beach HBFRF1010-3BCOM Owner's Manual

LEVELING INSTRUCTIONS

There are two adjustable legs on the bottom of the appliance that can be
turned up or down to ensure that the appliance is level.
1. Turn the leveling leg counter-clockwise as far as it will go, until the top of
the foot is touching the bottom of the chassis.
2. Slowly turn the leveling leg clockwise until the appliance is level.
DEFROSTING
This appliance should be defrosted approximately twice a year or when a 6
mm (1/4 inch) layer of frost has formed.
1. Turn the thermostat dial to the "0" position and unplug the power cord.
2. Remove all contents and leave the door open.
3. As the frost melts, water will collect in the drip tray in the bottom of the
appliance.
4. Check the appliance frequently while defrosting to ensure that water does
not leak and cause damage to flooring.
5. When all frost has melted, wipe the interior of the appliance with a towel or
sponge to ensure it is completely dry before resuming operation.
6. Plug the appliance in, turn the thermostat dial to the desired setting and
replace all contents once the appliance has reached the desired
temperature.
Important: Do not use pointed or sharp objects to remove frost as this can
damage the refrigerant lines. If these lines are accidentally pierced it will
render the freezer inoperable and will void the manufacturer's warranty.
10
4