Onkyo TX-SR501 Instruction Manual page 37

Audio Adjust Functions
These Functions only work with speaker set A.
Audio Adjust provides various functions for adjusting the
sound, including several especially for use with Dolby Digi-
tal, DTS, and Pro Logic II material.
The following table lists the Audio Adjust funclions, their
ranges and default values. Function availability depends on
the current source and listening mode, as listed in the "Sup-
ported listening mode" column. See page 34 For information
on listening modes.
Function
Bass
Treble
Late Night
Cinema
Filter
(Cine Fltr)
Center
Image
Panorama
Dimension
Center
Width
Supported
Range Default listening mode
-12 dB to
+12 dB in 2 dB 0 dB All modes except
Direct
steps
Low, High, Off Dolby D
PL II Movie
Off Dolby DIDolby D EX
On, Off DTS/DTS-ES
Neo:6 Cinema
0,1,2,3,4,5 3 Neo:6Music
On, Off Off
0,1,2,3,4,5,6
0,1,2,3,4,5,
6,7
PL II Music
[z
@ @
<1 PRESET/ADJUST I_
L
AUDIO ADJUST
CINE FLTR--
LATE NIGHT--
AUDIO ADJUST--
Note:
f
TAPE]toselect
RCVR mode.
Use the [AUDIO/ADJUST] button to
select a function.
B.-
2.
Function
Note:
Before pressing the remote controller's
[AUDIO/ADJUST] button, press its
[RCVR/TAPE] button to select RCVR
mode.
Use the [PRESET/ADJUST] <1 I_
buttons on the TX-SR501/
TX-SR501E, or the ADJUST <1 I_
buttons on the remote controller to
set the selected function.
_iiiiiiiiii
The Cinema Filler and Late Night functions can be con-
trolled from the remote controller by using the dedicated
[CINE FLTR] and [LATE NIGHT] buttons. First press the
remote controller's [RCVR/TAPE] button to select RCVR
mode, then press [CINE FLTR] or [LATE NIGHT] to display
the current setting; press again to change it
37