Onkyo TX-SR501 Instruction Manual page 27

Configuring Speaker Set A--Continued
CH SEL-
TEST--
.................... LEVEL VIA
--VOLUME V/&
When you've adjusted each
speaker, press the remote control-
ler's [TEST] button.
The test tone stops and the previous dis-
play reappears.
Note:
If no adjustments are made for two minutes, this function is
cancelled automatically and the previous display reappears.
With this function you can adjust the volume of each individ-
ual speaker so that you can hear all speakers equally at the
listening position,
Note:
You cannot use this function while the TX-SR501/
TX-SR501E is muted (see page 33).
27