Remove The I/O Bracket (Right) - Lenovo 21DK0047IX Hardware Maintenance Manual

Figure 24. Remove the I/O bracket (left)
Screw specifications
M2.0 x L4.0
Go to
https://support.lenovo.com/partslookup
part:
I/O bracket (left)

Remove the I/O bracket (right)

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 34
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Remove two screws and then remove the I/O bracket (right).
Figure 25. Remove the I/O bracket (right)
Screw specifications
M2.0 x L4.0
Go to https://support.lenovo.com/partslookup
part:
Number of screws
6
to look up the Lenovo part number of the following replacement
Number of screws
2
to look up the Lenovo part number of the following replacement
.
Chapter 4 Removing a FRU or CRU
45