Switching On And Off; Inserting And Removing Discs - Philips CDR880 User Manual

USING THE REC@
The numbers between parentheses refer to the front fold-out.
Switching ON and OFF Inserting and removing discs
1 Connect the plug on the mains cable in the proper connection Inserting discs
point (44). Plug the cable into the mains. 1 Press the OPEN/CLOSE button (6) on the front of the appliance
2 Press the Power ON/OFF button on the front (7) of the to open the disc drawer.
CD-Recorder to turn it on (display will light up) or off. 2 Insert an appropriate disc (see introduction p. 3) in the
appropriate area in the drawer with the label facing up.
3 Gently press the front of the drawer or press the OPEN/CLOSE
Note:
Inserting the batteries - Check to ensure that the recording side of the disc is clean (See
1 Open the battery lid. Disc Maintenance, p. 11).
2 Insert two 'AAA' (R03 or UM-4) baiteries in the manner - /f an inappropriate disc is inserted, the display will show //1./
indicated. FRILL T LT,
3 Replace the lid. - If you insert a blank disc or non-finalized CD-R or CD-RW in the
drawer, the recorder will calibrate the disc for optimum recording.
During this process, the display will first show L/L and then the
recording time used and the last track number.
Removing discs
1 Press the OPEN/CLOSE button (6) on the front of the appliance
to open the disc drawer.
2 Remove the disc from the drawer.
Gently press the front of the drawer or press the OPEN/CLOSE
button (6) to close the drawer.
yf
i a Ree he.
Attention!
Do not use old and new batteries together.
Never use different types of batteries (standard,
alkaline, etc.) together.
Note:
- The player cannot be switched on and off using the remote
control.
- Always point the remote control directly towards the recorder and
make sure there are no obstacles between the remote control
and the appliance.
- When you press a bution on the remote control, the indicator (20)
on the display of the CD-Recorder will light up.