Electrolux ETB3440M-H User Manual page 23

Table of Contents

Advertisement

Available languages

Available languages

CONCERN
The exterior of the
appliance is warm or hot
to touch
This is normal because the
appliance transfers heat
from the inside out through
the outer panels and the
divider between the doors.
User interface will not
respond
To ensure settings are not
accidentally changed the
user interface will go into
sleep mode when not in
use. Press any button to
wake user interface
Alarms Sounding
Alarm activates if the
refrigerator or freezer doors
are left open for longer
than 2 minutes.
Frost build up
Odours
Lights not working
The LED lighting is
designed to turn on
gradually. The LED
lighting is designed to dim
automatically if the door
is left opened for more
than 5 minutes and turn
off completely if the door
is open for more than 7
minutes. Closing the door
will reset the timer.
WHAT TO DO
• Ensure the appliance has the external clearances
recommended in the section "Installing your new appliance".
• The exterior of the cabinet will be much warmer on warmer
days it may even feel hot to touch, as the appliance is working
harder.
• Check that the user interface is in awake mode, refer to section
"About the user interface".
• Check that the user interface is not locked, refer to section
"About the user interface".
• If the user interface is frozen turn the appliance off for five
minutes for the memory to clear, then turn back on.
• Check that all doors are fully closed.
• To silence the alarm for 8 minutes while the door is open press
any button on user interface or close the door.
• Check that all doors are fully closed.
• Ensure that the doors are not opened too often.
• Ensure that the return air vents are not blocked with packaging.
• Ensure the seals are clean and not obstructed.
• The interior may need cleaning, refer to cleaning guide.
• Ensure that food is stored correctly as some food, containers
and wrapping can produce odours.
• Check appliance for old or unusual food.
• Ensure that the cord is plugged into a live power outlet and
outlet is switched on.
• Ensure that the household circuit breaker has not tripped or that
the fuse has not blown.
EN
23

Advertisement

Table of Contents
loading

Table of Contents