Samsung HW-S60D User Manual page 9


(Mute)
Press the (Mute) button to mute the sound.
Press it again to unmute the sound.
LED
Indicator
Volume

Push the button up or down to adjust the volume.
LED
Indicator
CH LEVEL

By pressing the button, you can adjust the volume of each speaker.
LED
Indicator
"Center Level"
– If the Rear Speakers (sold separately) are connected, the setting "Rear Level" is supported. Use the
Up/Down button to adjust the volume of the "Rear Level" between -6 to +6.
 (Sound Control)
By pressing the button, you can set the audio function. The desired item can be adjusted using the Up/
Down buttons. Each time the mode changes, the Multicolor LED blinks in white.
LED
Indicator
"SpaceFit Sound"
mode"
– Press and hold the
frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/
Right buttons and each can be adjusted to a setting between -6 to +6 using the Up/Down buttons.
(Make sure the Sound mode is set to "Standard".)
– If the Rear Speakers (sold separately) are connected, the setting "Sound Grouping" and "Private Rear
Sound" are supported.
– Refer to "Setting the
Blinks X Repeatly
White moves to right X1
Volume Up
White Blinks X1

"Side Level"

" Active Voice Amplifier"
 "Sync"  "Virtual"
(Sound Control) button for about 5 seconds to adjust the sound for each
(Sound Control)" on page 11.
White moves to left X1
White Blinks X1

"Voice enhancement"
ENG - 9
Volume Down

"Night