Turn The Monitoring Mode On And Off; Open The Optic Gate - Honeywell VC4 User Manual

4.17 Turn the Monitoring Mode On and Off

1. In the left navigation panel, tap OVERVIEW
2. Tap on the Analyzer button to enter to the analyzer detail page.
3. In below page, switch the toggle button of Monitoring mode can setup the analyzer either
as Monitor or as Idle.
Note: The Optic gate is closed when Monitoring mode is on.

4.18 Open the Optic Gate

1. In the left navigation panel, tap OVERVIEW
2. Tap on the Analyzer button to enter to the analyzer detail page.
3. In below page, switch the toggle button of Optic gate into Open.
Note: The Optic gate is closed when Monitoring mode is on.
VC4™
.
.
61 User Manual