BenQ MW665+ User Manual page 52

Function
Network
Settings
Reset All
Settings
Current
System
Status
USB
READER
(available
only when a
USB flash
drive is
detected)
52 Operation
See BenQ Network Projector Operation Guide
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size, User 1,
User 2, Color Space Conversion, Projector Installation, High
Altitude Mode, Security Settings, Baud Rate and Network Settings.
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the PICTURE menu.
Lamp Mode
Shows the current lamp mode.
Resolution
Shows the native resolution of the input signal.
3D Format
Shows the current 3D mode.
Color System
Shows input system format.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
Firmware Version
Shows the firmware version of your projector.
See "Presenting from a USB Reader" on page 40
Description
for details.
for details.