BenQ MW665+ User Manual page 24

Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either
the top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, you will need to manually correct it following ONE of these steps.
• Press
remote control to display the
Keystone correction page. Press
to correct keystoning at the top of the
image. Press
keystoning at the bottom of the image.
For the MW665+, you can also press
on the projector to correct
keystoning at the right side of the
image. Press
correct keystoning at the left side of
the image.
• Using the OSD menu
1. Press MENU/EXIT and then press
/
highlighted.
2. Press
and press MODE/ENTER. The 2D
Keystone correction page displays.
3. Press
the top of the image. Press
correct keystoning at the bottom of the image. Press
keystoning at the right side of the image. Press
keystoning at the left side of the image.
24 Operation
/ on the projector or
to correct
on the projector to
until the DISPLAY menu is
to highlight 2D Keystone
to correct keystoning at
2D Keystone
Press
Press
to
on the projector to correct
MENU Exit
.
.
Press
.
.
Press
on the projector to correct