JVC GZ-MG335 U Instructions Manual page 87

Copying Files
(Continued)
Using a VCR/DVD Recorder to Dub
Files from the Camera
Preparation:
• Set [SWITCH TO ANALOG I/O] to
[OUTPUT]. (Factory-preset
=
[OUTPUT])*
(a pg. 63)
• Turn off all units.
* This does not
apply
to the
GZ-MG330
model.
ToAC
Outlet
AV Jack - - - - - ,
. .
~\====::dJ
AC Adapter
AV Cable
1
Set the VCRlDVD recorder to its AUX
input mode.
2
Start playback on the camera.
• To play back videos (a pg. 27)
• To play back playlists ("When dubbing
playlists using a VCRlDVD recorder"
a
pg. 37)
3
At the point you want to start
dubbing, start recording on the VCRI
DVD recorder.
Refer to the VCRlDVD recorder's
instruction manual.
• To stop dubbing
Stop recording on the VCRlDVD recorder,
then press the START/STOP button again.
1mB
To record only the date information among the
display indications, set [DISPLAY ON TV] to
[ON], and touch the OK button until date/time
indication appears. (a pg. 65)
46
VCR/OVO Recorder
AVlnputJack
You can also connect the cables using the
jacks on the Everio dock connectors. The
S-Video or DV cable (optional) enables even
higher dubbing quality. (a pg. 10) When other
devices such as a DVD burner are connected
to the Everio dock, turn the power of these
devices off. *
*
GZ-MG330 model does not include the
Everio dock.