JVC GZ-MG335 U Instructions Manual page 85

Copying Files
(Continued)
I
Selecting Files for Backup
Preparation:
• Connect the camera to the DVD burner.
(IT pg. 42)
• Slide the mode switch to select
III
or Q
mode.
The following screen illustrations are
examples when backing up video files.
1
Select [SELECT AND CREATE].
2
Select the desired menu.
• [CREATE BY DATE]:
Files are sorted according to the date
on which they were recorded. Relevant
files are displayed in a list. Select the
recording date, and touch the OK button.
• [CREATE BY EVENT*]:
Files are sorted according to event.
Relevant files are displayed in a list.
Select the event, and touch the OK
button.
• [CREATE BY PLAYLlST*]:
Files are sorted according to playlist. The
selected playlists are displayed in a list.
1) Select the desired list, and touch the
OK button.
2) Select the insertion point and select
~.
To select other lists, repeat this
process.
• [SELECT FROM SCENES]:
Select files indiVidually.
1) Select the desired file, and touch the
OK button.
2) Select the insertion point and select
~.
To select other files, repeat this
process.
*
Not available in Q mode.
44
3
Select the desired disc number.
• If you select [ALL], all discs in the list are
created .
• To preview scenes, select [CHECK].
When the index screen of individual
scenes appears, select the file, and
touch the OK button.
To return to previous screen, select
!:J.
• G>
mark shows that the disc is created
already.
4
Select [EXECUTE].
• A disc begins to be created. When
[COMPLETED] appears, touch the OK
button.
• When [COMPLETED. CHANGE DISC]
appears, change the disc. The second
disc begins to be created.
• To cancel the disc creation, select
[STOP].
• To quit the screen
1) Select [EXIT].
2) When [QUIT?] appears, select [YES].
lED
When executing [CREATE BY PLAYLlST],
date/time on the file information display shows
the date of copying the file, instead of the
actual recording date.
• To duplicate a disc
The last creation date is displayed. (Up to
20 files)
1) In step 1 (IT left column), select
[CREATE DUPLICATE].
2) Select the date and touch the OK
button, then go to step
4.
• To check whether the DVD disc was
created properly
In step 1 (IT left column), select
[PLAYBACK], and touch the OK button.