Table of Contents
Advertisement
The display shows:
A
• The programme time
When the programme starts, the time decreases with steps of 1 minute.
• The delay start
When you press the delay start button, the display shows the delay start
time.
• Alarm codes
If the appliance has a malfunction, the display shows alarm codes. Refer
to 'Troubleshooting' chapter.
• Err
The display shows this message for some seconds if:
– You set a function that is not applicable for the programme.
– You change the programme while it operates.
The indicator of the Start/Pause button
•
When the programme is completed.
B
C
START/PAUSE BUTTON
Press button
to start or interrupt a
4
programme.
DELAY START BUTTON
Press button
5
to delay the start of a
programme from 30 minutes to 20
hours.
TIME SAVE BUTTON
Press the button
6
programme duration.
• Press one time to set 'Shortened du-
ration' for items with daily soil.
• Press two times to set 'Extra Quick'
for items with almost no soil.
Door lock
• You cannot open the appliance door when the symbol is
on.
• You cannot open the appliance door when the symbol
flashes. Wait for some minutes before you open the door.
• You can open the door only when the symbol goes off.
If the programme is completed but the symbol stays on:
• There is water in the drum.
• The 'Rinse Hold' function is on.
The child lock symbol
The symbol comes on when you activate this device.
4
5
6
to decrease the
flashes.
4
Some programmes accept only
one of the two functions.
EXTRA RINSE BUTTON
Press button
7
to add rinsing phases
to a programme.
Use this function for persons allergic to
detergents and in areas where the wa-
ter is soft.
SPIN BUTTON
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
• Activate the 'Rinse Hold' function.
Set this function to prevent fabric
creases. The appliance does not
ENGLISH
9
7
8
Advertisement
Table of Contents
