Maintenance; Specifications - Zenith P42W24B Installation And Operating Manual

Plasma display panel
Table of Contents

Advertisement

Maintenance

- Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your
new Monitor. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
Cleaning the Screen
1. Here's a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and
a little fabric softener or dish washing detergent. Wring the cloth until it's almost dry, and then use it to wipe the
screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your Monitor.
Cleaning the Cabinet
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
Extended
Absence
Extended
Absence
If you leave your Monitor dormant for a long time (such as a vacation), it's a good idea to unplug the
power cord to protect against possible damage from lightning or power surges.
Product Specifications
MODEL
Width (inches / mm)
Height (inches / mm)
Depth (inches / mm)
Weight (pounds / kg)
Power requirement
Resolution
Color
Operating Temperature Range
Operating Humidity Range
Maximum Elevation
• The specifications shown above may be changed without notice for quality improvement.
P42W24B
40.7 / 1033
24.5 / 622
3.2 / 81
75 / 34
AC120V, 60Hz
852 x 480 (Dot)
16,770,000 (256 steps of each R, G and B)
32 ~ 104°F (0 ~ 40°C)
Less than 80%
6561 feet (2000m)
31

Advertisement

Table of Contents
loading

Table of Contents