Off Timer Setup - Zenith L20V26C Installation, Setup & Operating Manual

Off Timer Setup

- Off Timer operates only if the Clock has been set to the current time.
- Off Timer overrides On Timer if they are set to the same time.
Use the menu button to select the
1
menu shown below.
Clock 10 : 45 AM
Clock
Off timer
On timer
Auto off
DE Move G Next Menu
2
Use the channel
select the Off timer option.
3 Press the volume (
D,E
the channel ( ) buttons to set the
turn-off hour.
Clock
10
Off timer
On timer
Auto off
F G Move DE Adjust Menu
206-3921
4
Off
D,E
buttons to
( )
G ) and then use
5
: 00 PM
Hold
6
Press the volume ( G ) and use the
D,E
channel ( ) buttons to set the min-
utes.
If you hold the channel ( D ) button, the
minute display is changed in the sequence
of 00 01 02 ...58 59, and changed
in the reverse sequence for channel (
button.
Clock
30
Off timer 10 : PM
On timer Hold
Auto off
F G Move DE Adjust Menu
G
Press the volume ( ) button and then
D,E
use the channel ( ) buttons to
select Hold or Run.
Hold, Off Timer will not work.
Run, Off Timer will work.
D E
Each press of channel ( , ) button
changes the menu option as shown below.
Run Hold
Press the menu button to save.
E
)
27