Table of Contents
Advertisement
Selecting Bilingual Signal (Second
Selecting Bilingual Signal (Second
On-screen display in stereo mode: STEREO
On-screen display in bilingual mode: SAP
- Bilingual (second audio program) signal
This signal contains the secondary language signal in addition to the primary language.
There are primary and secondary language and stereo modes in bilingual signals.
[MONO]: The primary language is heard from left and right speakers in mono sound.
[STEREO]: The primary language is heard from left and right speakers in stereo sound.
[SAP]: The secondary language is heard from both left and right speakers in mono sound.
mts
1
Press the
button on the remote control.
2
Use the
mts
button to change the audio mode.
Each press of
mts
shown below.
Mono
3
Press the
enter
- Select Mono sound mode if the signal is not clear or in poor signal reception areas.
- STEREO and SAP modes are available only if included on the broadcast signal.
206-3839-01
button changes the audio mode as
Stereo
SAP
(
A
) button to save.
Audio Program)
Audio Program)
39
Advertisement
Table of Contents
