Setting The Countdown Start Time; Using The Timer; Creating A Reminder - Casio 5724 Operation Manual

Setting the Countdown Start
Time
The start time can be set in 1-second units up
to 60 minutes.
If a timer countdown operation is in
●
progress, reset the timer to its current start
time before performing this operation.

Using the Timer

l
1.
Enter the Timer Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
Release the button when the minutes
setting starts to flash.
This causes the minutes digits to flash.
This is the setting mode. The hands
●
automatically shift out of the way for
easy viewing of the display and other
indicators.
Minutes
3.
Use (B) and (D) to change the minutes
setting.
Holding down (B) or (D) scrolls through
●
settings at high speed.
4.
Press (C).
This causes the seconds digits to flash.
Seconds
5.
Use (B) and (D) to change the seconds
setting.
6.
Press (A) to exit the setting screen.
Note
Setting a start time of [00'00] will
●
perform a countdown of 60 minutes.
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Watch Operation Guide 5724
Using the Timer
1.
Enter the Timer Mode.
Navigating Between Modes
l
2.
Use the operations below to perform a
timer operation.
A beeper will sound for 10 seconds to
●
let you know when the end of a
countdown is reached.
You can reset a paused countdown to
●
its start time, by pressing (A).
3.
Press any button to stop the tone.
Minutes, seconds
D
Start
(Countdown starts)
D
Pause
D
Resume
(Time up)
Reminder
After you create a reminder for an
appointment, anniversary, or some other
event you don't want to forget, the watch will
remind you when that day arrives.

Creating a Reminder

Use CASIO WATCHES to create reminders.
To use CASIO WATCHES, you first need to
●
pair your watch with a phone.
Getting Ready
l
If the watch is already paired with a phone,
●
use CASIO WATCHES to create reminders.
Configuring Reminder Settings
l
22