Vcr Setup - Zenith DPDP60W Owner's Manual

VCR Setup

- As shown below, when connecting the Monitor to a VCR, match the colors of AV input
jacks on the Monitor with the output jacks on the VCR: Video = yellow, Audio (Left) =
white, Audio (Right) = red.
- If you have a mono VCR, connect the audio cable from the VCR to the AUDIO(L/MONO)
input of the Plasma Monitor.
- If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved;
compared to connecting a regular VCR to the Video input.
- Avoid having a fixed image remain on the screen for a long period of time. Typically a
frozen still picture from a VCR, or if a CH label is present; the fixed image may remain visi-
ble on the screen.
Y
R L
AUDIO VIDEO
(MONO)
COMPONENT (480i/480p/720p/1080i)
AV INPUT
(DVD/DTV INPUT)
S-VIDEO
OUT
(R) AUDIO (L)
IN
< Back panel of VCR >
Tips
• To avoid picture noise (interference), leave an adequate distance between the
VCR and monitor.
14
R AUDIO L (MONO) VIDEO Y P
COMPONENT (480i/480p/720p/1080i)
AV INPUT
(DVD/DTV INPUT)
P P
B R
RGB-PC INPUT
(VGA/SVGA/XGA/SXGA)
RGB-DTV INPUT
(480p/720p/1080i)
VIDEO
(+) R ( ) ( ) (+)
P R L L
B R AUDIO
RGB-PC INPUT
(VGA/SVGA/XGA/SXGA)
AUDIO INPUT S-VIDEO EXTERNAL SPEAKER (8 ) AC INPUT
RGB-DTV INPUT
(480p/720p/1080i)
R AUDIO L
AUDIO INPUT
To watch VCR
video/pc
Press video/pc button on the remote con-
1
trol and select
2 Insert a video tape into the VCR and press
the PLAY button on the VCR. See VCR
owner's manual.
R L
(+) ( ) ( ) (+)
EXTERNAL SPEAKER(8 )
S-VIDEO
< Monitor back panel >
VIDEO .
AC INPUT