Vcr Setup; Cable Tv Setup - Zenith P42W34 Installation And Operating Manual

NOTE: Not all cables shown are included with the TV.

VCR Setup

VCR Setup
- To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
- Use the ISM Method feature to avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still
picture from a VCR. If the 4:3 picture format is used; the fixed image may remain visible on the screen.
Connection 1
Set VCR switch to 3 or 4 and then tune TV to the same channel
number.
Connection 2
1. Connect the audio and video cables from the VCR's output jacks to
the TV input jacks, as shown in the figure.
When connecting the TV to VCR, match the jack colors (Video =
yellow, Audio Left = white, and Audio Right = red).
2. Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owner's manual.)
3. Use the INPUT SELECT button on the remote control to select
Video (Exp.).
Cable TV Setup
Cable TV Setup
- After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming.
- For further information regarding cable TV service, contact your local cable TV service provider(s).
Connection 1
1. Select 3 or 4 with channel switch on cable
box.
2. Tune the TV channel to the same selected
output channel of cable box.
3. Select channels at the cable box or with the
cable box remote control.
Connection 2
1. Connect the audio and video cables from the
cable box's output jacks to the TV input
jacks, as shown in the figure.
When connecting the TV to cable box, match
the jack colors (Video = yellow, Audio Left =
white, and Audio Right = red).
2. Use the INPUT SELECT button on the
remote control to select Video (Exp.).
3. Select channels with the cable box remote
control.
(DC 12V)
1
DC IN ANT IN AV(EXPANDED) INPUT
(DC 12V)
+75
R
AUDIO
1
(R) AUDIO (L) VIDEO
OUTPUT
SWITCH
TV
3 4
VCR RF Cable
DC IN ANT IN
AV(EXPANDED) INPUT AV OUTPUT
+75
R AUDIO L (MONO) VIDEO R AUDIO L
2
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
VCR
AV OUTPUT REMOTE
CONTROL EXPANDED OUTPUT
L (MONO) R L
VIDEO AUDIO VIDEO
2
(R) AUDIO (L)
or
TV
VCR
Cable Box
Installation
REMOTE
EXPANDED OUTPUT
CONTROL
VIDEO
OUT
(R) AUDIO (L) VIDEO
3 4
IN
VIDEO
OUTPUT
SWITCH
3 4
RF Cable
Owner's Manual 13