Using The Remote Control - Zenith DPDP60W Owner's Manual

Using the remote control

Installing batteries
Notes for using the remote control
Make sure these are no
objects between the
remote control and its
sensor.
30
• Open the battery compartment cover on the back
of the remote control and insert the batteries with
correct polarity, match "+" with "+", and match "-"
with "-".
• Install two 1.5V "AA" alkaline batteries.
Don't mix the used batteries with new batteries.
Don't place the remote control
near a heater or damp place.
Strong impact on the remote con-
trol may cause operation failure.
Signal from the remote control
may be disturbed by sun light or
other strong light. In this case,
turn the set to other direction.