Optional Equipment Connections; Antenna Connections - Zenith DVT216 Installation And Operating Manual, Warranty

Connections (Cont'd)

Optional Equipment Connections

Connect a TV (Monitor) to the MONITOR OUT or S-VIDEO OUT connector.
Connect a VCR to the VIDEO 1 jacks.
Connect an additional VCR to the VIDEO 2 jacks.
Connect the optical output of DVD Receiver (or Digital Device etc) to the OPTICAL IN connector.
otes
When you select the VIDEO 1 function mode on remote, no video signal is output to the VIDEO 1 jack.
If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce
a strong, distorted sound or no sound at all.

Antenna Connections

Connect the supplied FM/AM antennas for listening to the radio.
Connect the AM loop antenna to the AM antenna connector.
Connector the FM wire antenna to the FM 300Ω antenna connector.
otes
To prevent noise pickup, keep the AM loop antenna away from the DVD Receiver and other components.
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it as horizontal as possible.
Additional VCR
IN OUT
VIDEO
AUDIO (L)
AUDIO (R)
To AUDIO/VIDEO OUT
To AUDIO/VIDEO IN
(VIDEO 2)
OPTICAL
DVD Player (or Digital Device, etc)
AM loop antenna (supplied)
VCR
IN OUT
VIDEO
To AUDIO/
AUDIO (L)
VIDEO OUT
AUDIO (R)
To AUDIO/
VIDEO IN
To AUDIO/
To AUDIO/
VIDEO IN
VIDEO OUT
(VIDEO 1)
(VIDEO 1)
FM wire antenna (supplied)
11