Advertisement
TV Connections
Make one of the following connections,
depending on the capabilities of your TV.
RF Coaxial Connection (R)
Connect the RF.OUT jack on the DVD+Hi-Fi
VCR to the antenna in jack on the TV using
the 75-ohm Coaxial Cable provided (R).
ote
If you use this connection, tune the TV to the
DVD+Hi-Fi VCR System's RF output channel
(CH 3 or 4).
How to set the DVD+Hi-Fi VCR's RF out-
put channel
While the DVD+Hi-Fi VCR System is turned
off, press and hold TUNING (v/V) on the
front panel for about five seconds to change
the RF output channel (CH 03 or CH 04).
"RF 03" or "RF 04" appears in the display
window.
S-Video Connection (S)
Connect the S-VIDEO OUT jack on the
DVD+Hi-Fi VCR System to the S-Video in
jack on the TV using the S-Video cable (S).
Component Video (Color Stream
®
)
connection
Connect the COMPONENT VIDEO OUT
jacks on the DVD+Hi-Fi VCR to the corre-
sponding in jacks on the TV using Y Pb Pr
cable (C).
Progressive Scan (ColorStream
®
pro)
Connection
If your television is high-definition or "digi-
tal ready", you may take advantage of the
DVD+Hi-Fi VCR System's progressive
scan output for the highest video resolu-
tion possible.
If your TV does not accept the
Progressive Scan format, the picture will
appear scrambled if you try Progressive
Scan on the DVD+Hi-Fi VCR.
Connect the COMPONENT VIDEO OUT
jacks on the DVD+Hi-Fi VCR to the corre-
sponding in jacks on the TV using an option-
al Y Pb Pr cable (C).
Front Speaker
(Right)
Rear Speaker
(Right)
CATV or ANTENNA
IN
To Wall Outlet
When you connect this system to your TV,
be sure to turn off the power and unplug
both units from the wall outlet before making
any connections.
C
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Y
Pb
Pr
VIDEO IN
ANT IN
S-VIDEO IN
Front Speaker
Center
(Left)
Speaker
FRONT
REAR
SUB
CENTER
REAR
FRONT
WOOFER
(R 6 )
(L 6
)
(R 6 )
( 4 )
( 6
)
(L 6 )
Rear Speaker
(Left)
Subwoofer
FM Wire Antenna
SUB
FRONT
REAR
CENTER
REAR
FRONT
WOOFER
(R 6 )
(R 6 )
( 6 )
(L 6
)
( 4 )
(L 6 )
S
R
Connecting Antenna/Cable TV
to DVD+Hi-Fi VCR System
1 1
Disconnect the antenna leads from the rear
of the TV.
2 2
Identify the type of cable from your anten-
na. If it is a round cable as illustrated, it is
a 75 ohm coaxial antenna cable. This
cable will connect directly to the jack
marked ANT.IN on your DVD+Hi-Fi VCR
System.
ip
If your antenna lead wire is a flat type antenna
cable, connect it to an Antenna Adapter (300-
ohm to 75-ohm) (not supplied) and slip the
Adapter onto the ANT.IN jack. The Adapter
does not screw on to the DVD+Hi-Fi VCR, it
just slips over the jack.
Speaker System Connections
Connect the speakers using the supplied
speaker cords, match the colors on the cords
with the terminal colors. To obtain the best
AM Loop Antenna
possible surround sound, adjust the speaker
parameters (distance, level, etc.).
otes
Be sure to match the speaker cord to the
appropriate terminal on the components: 3
to 3 and # to #. If the cords are reversed,
the sound will be distorted and lack bass.
When making the sound louder, adjust the
sound level carefully to avoid excessive vol-
ume output to the speakers.
Do not disassemble the front covers of supplied
speakers.
Radio Antenna Connections
Connect the supplied AM/FM antennas for
radio listening.
1 1
Connect the AM loop antenna to the AM
antenna connectors.
2 2
Connect the FM wire antenna to the FM
antenna connectors.
otes
To prevent noise pickup, keep the AM loop
antenna away from the DVD+Hi-Fi VCR
System and other components.
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep
it as horizontal as possible.
Advertisement
