Sound Mode; Sound Level; Test Tone - Zenith DVT216 Installation And Operating Manual, Warranty

Before Operation (Cont'd)
Sound Mode (Except AM)
You can enjoy surround sound simply by selecting one
of the pre-programmed sound fields according to the
program you want to listen to.
When PCM indicator is only displayed in the
display window:
Each time you press the SOUND MODE button, sound
modes are selected in the following order;
PRO LOGIC → HALL1 → HALL2 → THEATER
Each time you press
mode is changed in the following order;
PRO LOGIC → EMULATION → MOVIE → MUSIC → VIRTUAL → MATRIX
ip
You can select SURROUND OFF (2CH STEREO) mode by
pressing BY-PASS button.
When DVD is inserted.
You can change the DVD sound mode of DVD (Dolby Digital,
DTS, PRO LOGIC, etc) by pressing the AUDIO button on the
remote during playback.
Although the DVD contents differ from disc to disc, the follow-
ing explains the basic operation when this feature is used.
Each time you press the AUDIO button, the DVD sound modes
are changed in the following order;
→ →
When DVD is inserted and PRO LOGIC
indicator lights.
Each time you press the
modes are selected in the following order;
EMULATION → MOVIE → MUSIC → VIRTUAL → MATRIX
ip
You can set PRO LOGIC mode to Off (2CH STEREO) by
pressing BY-PASS button, the PRO LOGIC indicator disap-
pears.
For your reference
• The DVD Receiver memorizes the last mode set-
tings for each source individually.
• You can identify the encoding format of program
software by looking at its packaging.
- Dolby Digital discs are labeled with the
- Dolby Surround encoded programs are labeled with
the logo.
- DTS Digital Surround discs are marked with DTS.
14
button, the Pro Logic II sound
and
button, Pro Logic sound
logo.
ote
When you play sound tracks with 96kHz sampling frequency,
the output signals will be converted to 48kHz (sampling fre-
quency).

Sound Level

You can set the sound level of the desired channel.
Press LEVEL.
1 1
The level indicator will appear in the display window.
Use / to select a desired speaker to set.
2 2
Each time you press the
selected in the following order;
FL (Front Left) → C (Center) → FR (Front Right) →
SR (Surround Right) → SL (Surround Left) →
SW (Subwoofer) → FL (Front Left)
• In the 2 channel stereo mode, you can only select
the SW (Subwoofer).
Use / to adjust the sound level of the select-
3 3
ed channel. (-6dB ~ +6dB)
Repeat step 2-3 and adjust the sound level of
4 4
the other channels.
If level settings are complete, press LEVEL.
5 5

Test Tone

This function allows you can easily adjust the sound
balance of the speakers from the listener's position.
Select the test tone mode by pressing TEST
1 1
TONE.
• A hiss noise comes out for 2 seconds from each speak-
ers in the following order;
FL (Front Left) → C (Center) → FR (Front Right) →
SR (Surround Right) → SL (Surround Left) →
SW (Subwoofer) → FL (Front Left)
You can adjust the sound level during operating
2 2
the test tone, first press LEVEL then press
buttons, so that all speaker's sound level is
same from the listener's position.
• During operating the test tone, if you adjust the sound
level, it will be paused in the current speaker channel.
If setting is complete, press TEST TONE.
3 3
/ button, speakers are
/